PumpMaster for acids and chemical liquids
Canister and drum pump for flexible use
- Easy and flexible transfer and filling of liquids
- Universal connector for easy installation
- Precise dispensing
- FKM seals for acids and chemicals
Please note
Not suitable for hydrochloric acid!
Pay attention to the chemical resistance of the materials! See also "List of chemical resistance"
Detailed information
The PumpMaster in green for filling and dosing acids and chemical liquids is equipped with high-quality FKM seals. Ideal for the safe handling of light acids and chemicals.
PumpMaster manual overpressure pumps are a reliable solution for easy transfer and filling of liquids. They are ideal for filling, transferring and emptying canisters and drums.
Three different universal plugs fit container openings from 46.5 to 60 mm in diameter. This makes it easy to fit and adapt to the container, even without knowing the exact thread specifications.
The delivery tube consists of several elements that can be shortened individually.
PumpMaster barrel pumps operate on the overpressure principle. A manual piston creates an overpressure in the container, which pumps the liquid out of the container.
The PumpMaster has an integrated tap for precise dosing of liquids. The tap can be operated to dispense liquid in a targeted manner or can be opened for flow by folding it forward.
The PumpMaster is lightweight and compact, making it easy to use in a variety of environments. Because PumpMaster pumps are independent of electricity and compressed air, they can be used flexibly.
Typical application area of the product
With PumpMaster canister and barrel pumps, you have your liquids under control, whether in the chemical industry, food industry, laboratory, industry or other fields.
How to use the product
- Measure the inside diameter of the container opening. Use the next smaller stopper that fits easily into the opening.
- Adjust the riser pipe to the container height, shorten one pipe if necessary.
- Plug the riser pipe and pump together.
- Insert the pump into the container opening and fix it securely by turning the hand wheel while simultaneously moving it downwards.
- Create excess air pressure in the container by actuating the hand piston. Press the dispensing valve lever down: Medium begins to flow. Release the lever: The flow is interrupted. For free, continuous flow, pull the lever forward and lock it. The flow rate can be reduced by inserting the reducing nozzle into the dispensing valve.
- Once the filling process is complete, release the excess pressure in the container. To do this, open the drain plug.
Material
- PumpMaster canister and barrel pump
- 3x universal stopper
Specifications
General material
PP
Polypropylene
Further materials
FKM, FPM
Fluorine rubber
Connection
- For openings from:
- 46.5 mm (1.8307 in)
- For openings up to:
- 60 mm (2.3622 in)
- Connection type:
- Variable universal stopper
Throughput
- Conveying capacity:
- 9 l/min (2.3775 GPM)
- Max. delivery rate:
- 20 l/min (5.2834 GPM)
Limit values
- Viscosity up to:
- 400
Ø
- Immersion tube Ø:
- 19 mm (0.748 in)
Coloring
- Color:
- green
Pump outlet
- Length of discharge tube:
- 40 mm (1.5748 in)
- Outlet type:
- Discharge tube
Delivery tube
- Immersion depth max.:
- 95 cm (37.4016 in)
- Immersion depth from:
- 10 cm (3.937 in)
- Immersion depth up to:
- 95 cm (37.4016 in)
Filling container
- Adjusting the immersion depth:
- Immersion tube can be shortened as required
- For containers up to:
- approx. 60 liters
How to fill
- Drive type:
- manually operated
- Pump type:
- Overpressure pump
- Special features Pumps:
- Exchangeable outlet elbow/hose
Outlet hose 1.5 m with tap available as an accessory.
Similar products
PumpMaster for aqueous liquids
PumpMaster for petrochemical liquids
Pump-it® canister pump
OTAL® hand pump PP
