Dosing pump Dosi-Pump 30 ml, fixed feeding tube
- Medium-contacting parts made of PP, PE and stainless steel
Detailed information
Standard dosage approx. 30 ml per stroke, the pump has a fixed feeding tube.
Dosing pumps are mounted by you in your existing container closure (see the locating bore table). To do this, a suitable hole is drilled in the cap. Then the pump is inserted through the hole and screwed in place from below.
A matching container connection is not included in the scope of delivery.
Typical application area of the product
Dosing pumps suitable for barrels, canisters, carboys or bottles, for dosing liquids of different viscosities.
- Dosing pump Dosi-Pump 30 ml, fixed feeding tube
Specifications
General material
PP
Polypropylene
General material
PE
Polyethylene
Further materials
1.4301 (AISI 304)
Stainless steel (1.4301), AISI 304
Further materials
PE-LD
Low-density polyethylene (LDPE)
Further materials
EPDM
Ethylene propylene diene monomer rubber
Connection
- Connection Ø:
- 22 mm (0.8661 in)
Throughput
- Conveying capacity:
- 30
Limit values
- Viscosity up to:
- 2200
Ø
- Pipe Ø:
- 18 mm (0.7087 in)
- Immersion tube Ø:
- 18 mm (0.7087 in)
Pump outlet
- Outer outlet Ø:
- 8 mm (0.315 in)
- Length of discharge tube:
- 130 mm (5.1181 in)
Delivery tube
- Immersion depth max.:
- 34 cm (13.3858 in)
Coloring
- Color:
- white
Filling container
- Adjusting the immersion depth:
- Immersion tube can be shortened as required
- For containers up to:
- approx. 10 liters
How to fill
- Drive type:
- manually operated
- Pump type:
- Reciprocating pump
Similar products
Dosing pump Dosi-Pump 4 ml
Standard dosage approx. 4 ml per stroke.
Dosing pump Dosi-Pump 30 ml
Standard dosage approx. 30 ml per stroke.
Dosing pump Dosi-Pump 100 ml, fixed feeding tube
Standard dosage approx. 100 ml per stroke, the pump has a fixed feeding tube.
Dosing pump Dosi-Pump 250 ml, fixed feeding tube
Standard dosage approx. 250 ml per stroke, the pump has a fixed feeding tube.